Drawer Organizer Planner

SPORGAN HOME · TOOLS & PLANNERS

Make room for what belongs.

Plan your drawer before you buy organizers. Add your measurements, check the fit, and take a simple plan with you.

1. Measure your drawer

Units

Measure the inside, below anything that stops the drawer closing. Front-to-back is depth.

Inside width in Inside depth in Usable height in

Leave a little breathing room

Clearance at each edge inGap between organizers in

Starting allowances only. Adjust for handles, hardware and room to grip items. These are not manufacturer recommendations.

2. Add your organizers

Use outside dimensions, including rims and handles. Add organizers you already have or sizes you are considering.

Allow a quarter-turn on the drawer floor

No signup needed. This tool does not submit or save your measurements. Print your result before leaving.

Your drawer, mapped out.

TOP VIEW

Start with your drawer measurements, or try an example.

A little planning. A better fit.

Your suggested layout will appear here, with each organizer numbered to match your list.

0 / 0pieces placed

0%drawer floor covered

Organizer fit summary
Organizer	Outside size	Placed

This is a suggested rectangular layout, not a guaranteed best arrangement. Pieces are kept upright on one layer. Check real-world fit, stability and the drawer’s load guidance before buying.

MAKE THE PLAN WORK

Measure twice, try cardboard outlines, then check that you can lift items out and close the drawer freely.

Read the deep-drawer guide →

How the planner works

It tries four packing orders, then shows the one that places the most pieces, using covered floor area to break ties. Width and depth may swap when rotation is enabled. Height is always checked separately; items are never stacked or laid on their side.

It models a flat rectangular drawer. Curved sides, pipes, sloping walls and irregular organizers need a physical check. The covered-floor percentage excludes gaps and includes only the footprints of the organizers shown.

Switching units converts your existing dimensions. The printable result includes your measurements and fit summary. Browser print scaling can change image size: use the printed dimensions, not a ruler on the drawing.

A practical plan, made around your measurements

How to use the Drawer Organizer Planner

Plan a drawer with your exact measurements. Test organizer sizes, rotation and clearances in a visual layout, then print your plan before you buy.

Your result: A measured top-view layout you can print.

1
Enter the usable inside size of your drawer.
2
Add organizer sizes and the clearance you want.
3
Compare the layout, rotate pieces and print the plan.

Frequently asked questions

Can I use centimetres?

Yes. Choose inches or centimetres before entering measurements.

Does this guarantee a product will fit?

Use the result as a planning guide and confirm rims, handles, slopes and real-world tolerances before buying.